TeamChase Steering Set-Up for the Losi 5IVE-T
Check this out. TeamChase is on fire this week. Showing off yet another new Losi 5IVE-T products in the video below.
There are a couple issues with the Losi 5IVE-T steering set-up. One of them mentioned in this video below talks about the steel and steel concerning possible binding. TeamChase fixes this issue buy using bushings and bearings with this new strong set-up.
The other issue is the stock hardware included with the truck uses these special made screws that have a very short threaded section. The short thread does not even allow for the full capture within the plastic part they screw into. The forces and vibration in the steering of this large scale truck creates a lot of issues and one of them being right on these screws. It’s common to see these screws strip or pull completely out of the plastic arm they screw into. Not only leaving you with no steering and often a lost screw but the plastic is ruined and will no longer allow for the screw to stay in place. An expensive and time consuming fix. The TeamChase custom long hardware and nylock nuts fixes this problem perfectly.
We are excited to see this product being debuted by Team Chase and if you’re interested in talking more about it check out THIS thread on RCLargeScale.
If your interested purchasing this product and want to be notified when it’s available please check out the TGN product page HERE.