Limited Carbon Fiber parts on sale now! Hydro Coated

Hydro Coated Carbon Fiber parts for your 1/5 Scale

 

TGN sells off limited samples – their loss your gain! Press Release Below.

 

TGN Press Release:

These are parts we had Hydro Coated as samples over a year ago. We love the looks and quality finish this procedure gives these parts. But the time, effort and cost was just not going to pan out at the time. So we held off doing any more of these items. We sat on them for more than a year and now they are for sale at prices below our cost.

Get the look of carbon fiber on strong metal parts. Check them out on ebay below! Get them while they last, we only have a limited amount of each product.

CLICK HERE FOR ALL THE PARTS THAT ARE AVAILABLE

 

TGN throws some deals on eBay! 3 different HPI 5SC’s – BZM!

TGN eBay deals are HOT!

Check out these 3 trucks we are offering up. These are what we have left over from our RCX booth. Never used, totally new and GREAT deals. Buy and save today!

 

HPI 5SC RTR – W/O Engine and Radio – $800 Too bad HPI does not sell them this way!

HPI 5SC RTR – NEW – NEVER USED $1050 WOW! (Edit, SOLD, better move fast!)

HPI 5SC RTR – Loaded with BZM engine, filters, stickers etc – DS Beadlocks – $1999 

 

A TON of other items for CHEAP on ebay! HPI baja and Losi 5IVE-T items! Check out our store HERE!

 

Team FastEddy Losi 5IVE-T Steering Servo Saver Nuts

Team Fast Eddy Servo Saver Jam Nuts for the Losi 5IVE-T

 

TFE steers you in the right direction with these two new great products for your Losi 5IVE-T. Many  of you will know what he is talking about when he says the steering servo saver nut is hard to adjust. Check out the details below and never worry about about this area of your truck.

 

 

Product Part Number: 1320-TFE

Product Link: HERE

 

Quick Adjust Servo saver and jam Nuts. (Losi 5ive)

Its darn near imposable to adjust the Losi 5ive servo saver while its
in your rig. Its hidden deep down and the spring tension is heavy.
Along with this on almost every rig, it will loosen up as you drive.
Team FastEddy has addressed these issues with our Quick Adjust Servo
Saver Nut and Jam Nut. Once installed simply use a screwdriver to hold
the nut and turn your wheels to tighten it down. Once its tightened up
use the included jam nut to hold it in place.

 

—————————————————————-

 

Product Part Number: 1321-TFE

Product Link: HERE

Servo Saver Jam Nut. Losi 5ive

The stock servo saver on the Losi 5ive can and will loosen up.
Use the TeamFastEddy servo saver jam nut to easily secure servo saver from creeping down and loosening.
Its a simple, inexpensive, and effective.

HPI Goes Flux Power With The New Baja 5B Flux

HPI Goes Brushless Power With The New Baja 5B Flux

 

Looks like its official. HPI announces their new brushless powered 1/5 scale, the Baja 5b Flux. We have talked about it before and have ran one of our own converted bajas in the past with video HERE and a build series HERE. If you have watched LSN grow and follow our videos and posts, you will know we like electric large scales. There is nothing better than having unlimited amounts of torque at your finger tips in these huge cars and trucks. In a 2 wheel drive the power is mostly taken advantage of in high traction locations, like grass or even better the sand dunes.  For more info on our builds check the links below or follow along our posts in the Electric Large Scale section.

Here is the official Press Release from HPI:

 

he Baja 5B Flux takes the stage as another large-scale release for HPI in 2012! This super-powerful, super-quick buggy can hit speeds up to 60mph with 8S power and a 780Kv motor! Powering this 1/5 Scale electric Baja is a Castle Creations Mamba XL2 ESC and 2028-780Kv electric motor that is 8s LiPo (33.6volts) compatible. With this power system and an 8s LiPo battery, there is nearly 10hp available right at your fingertips. Completing the package is also a Baja 5B Flux specific body that features smooth flowing body lines on both sides of the shell since there is no need for a fuel cap entry slot on the left side of the shell.

FEATURES:

VVC/HD Shock Absorbers
These are the same damper units that equip the Baja SS and Baja 5T, and are now standard parts for the 5B FLUX – these are oil-filled, externally adjustable coilover shocks for fantastic performance and heavy-duty action! Thick shock shafts provide security from crashes, threaded shock bodies allow instant ride height changes, and the externally adjustable design is tailor-made for trackside tuning.

Gunmetal Anodizing
The Baja 5B FLUX includes a total reworking of all the aluminum parts of the Baja buggy, from the chassis to the spring adjust collars! The very cool gunmetal look gives the Baja 5B FLUX the ‘race’ look, and it’s easy to add a bit of bling with Baja SS or original 5B color parts.

2.4GHz TF-20 Radio Set
The Baja 5B FLUX is equipped with a high quality HPI 2.4GHz radio system. 2.4GHz technology provides you with the best possible vehicle operation and control, without the need of crystals, just turn on your radio and drive. Racing in large groups is possible without running into any frequency conflicts.

Castle Creations Running Gear
Big cars require big power and fueling the 5B FLUX’s healthy appetite for power is Castle Creations Mamba XL2 ESC and NEU-Castle 2028-780Kv Motor. The XL2 is widely known for its large-scale applications, ability to handle 8s(33.6volts) LiPo configurations, 5amp BEC for large scale servos, and fully programmable. Paired with the 2028-780Kv motor and 8s LiPo there’s nearly 10hp ready and waiting at your throttle trigger.

Large Battery Box
The 5B FLUX features a tool less easy entry large sized battery box capable of holding two hard case 4s LiPo packs or one 8s LiPo pack with an easy to reach opening for connecting the battery(s) and ESC together.

SFL-11MG SERVO
The hi-torque SFL-11MG servo features extra tough all metal gears for durability, an aluminum steering arm and a water resistant case.

Adjustable Motor Mount
Adjustable motor mount for easy final drive ratio adjustments by changing the pinion sizes.

5SC Drivetrain
In order to meet the demands of the massively powerful Castle Creations running gear, the 5SC drivetrain was fitted onto the 5B FLUX to increase reliability.

Losi 5IVE-T Mud Flap Savers by TGN – Quick Look

Quick Look at the TGN Mud Flap Savers for the Losi 5IVE-T

TGN was tired of driving around their cool test Losi 5IVE-T trucks with ripped or missing mud flaps. As a matter of fact, before this product was developed every truck of theirs had missing mud flaps. So they designed these little gems to keep that from happening ever again.  Oh and did we mention they look great too! Press Release and VIDEO below.

Product Part Number: TGN-1102, 1103, 1104, 1105

Product Link: HERE

 

Press Release:

 

 

The TGN Billet Mud Flap Saver from TGN is CNC machined from solid 6061-T6 aluminum and includes longer hardware.

 

The stock piece these replace is made of flimsy plastic and acts only as a washer. We have found each and every mud flap on all our Losi 5IVE-T trucks have been ripped off after extended use. This is because all the force when the flap is pulled or driven over is being applied to just the thin rubber around the mounting hole. This new billet replacement part from TGN offers a much stronger support and cups the thick part of the mudflap from underneath adding much more rigidity. The included hardware is also much longer to ensure your getting all the threads available inside your plastic cage.

 

Choose your color, comes with included hardware.

 

Give your mud flaps an even stronger support and almost eliminate any chance of ever ripping a mud flap out by the screw holes by adding TWO sets of Mud Flap Savers. This method creates a clam shell effect and clamps the flaps to your cage securely to ensure they will not be pulled off. A second set must be purchased if your interested in this method.

BZM Micro Engines offer up a Podium Bounty

 

BZM Brings CASH to the people

Check out 1/5 racers! Do you own a HPI baja or Losi 5IVE-T with a BZM gas engines? If you do and you compete on your local track then you need to read the press release below.

Source: BZM Micro Facebook

 

BZM Micro’s podium bounty!

Race and win running BZM Micro engine’s and we will reward you!

Simple as this.

Post a picture here or email to sales@bzm-micro.com your podium result you earned using a BZM Micro Engine and earn a bounty unto £70($100)

National races.
1st £70
2nd £35
3rd £15

Regional races
1st £50
2nd £25
3rd £10

Club races.
1st £40
2nd £20
3rd £10

To qualify. The picture must be of you the claimant and your model. Your model should display a BZM micro sticker and the engine be visible or a secondary picture showing your running a BZM micro engine.
This applies to all races On and Off road until further notice.

We reserve the right to refuse claims if found illegitimate. Or fraudulent.
Payment will be made by PayPal only if cash is selected or BZM parts to the value awarded.

Kill your korrosion – from KILLER RC

 

KORROSION KILLER FROM KILLER RC.

 

Nice new product from Killer-RC. Something handy for all… Check out the details below.

 

Part Number: KRC-AC-KORK

Product Link: HERE

Korrosion Killer is the most useful corrosion inhibitor / lubricant / penetrant / anti-seize / waterproofer available today. Korrosion Killer stops corrosion between metals and prevents rust on bolts, bearings, and driveshafts. Korrosion Killer is an awesome waterproofer too.

Simply apply a couple drops of Korrosion Killer on the circuit board of your servos, radio receiver, kill switch, light controller, LED lights, etc.

Korrosion Killer should be re-applied every 2 years for maximum protection.

RONSHOP RACING EDM Body gets revision – V3

 

RONSHOP RACING EDM HPI Baja Body V3

Good to see some updates from RONSHOP RACING. Check out the updates done to their current HPI Baja oval body. We think the modifications look great and I look forward to seeing more of these 1/5 scale racers around the country and beyond.

The word on the street is they have something else new up their sleeve and if I had to guess its not for the baja model of cars. hhhhmmmmmm?????

 

Press Release Below:

 

Part Number: 9305

Product Link: HERE

 

NOTE:

The v3 is wider and taller than its predecessor and has a new nose.

 

BODY KIT INCLUDES ALL HARDWARE AND MOUNTS FOR A STOCK HPI 5B BUGGY

1)       2 sides
2)      1 center main body section
3)      1 roof
4)      1 molded nose
5)      2 front wing sides
6)      2 bent lexan under supports with left and right hand slots
7)      1 bent lexan under support for the rear body mounts
8)      1 aluminum angle with slots and hole
9)      1 bag of button head screws
10)     1 bag of nylock nut
11)     1 bag of body pins
12)     4 body mount pins
13)     8 zip ties
14)     1 piece of 3/8 fuel line 8” long
15)     1    ¼” aluminum rod
With an offset center and molded nose, Ronshop Racing is the most realistic looking EDM on the market. Made from flexable and durable .040 lexan. Cut and molded %100 in the USA.

Team FastEddy Bearing and Guide for TR Pull start

 

Bearing & Cable Guide Kit for the Turtle Racing Pull Start V2

 

 

Fast Eddy to the rescue with a nice new product for your Turtle Racing Pull V2 Pull Start in your HPI baja or Losi 5IVE-T. Check out the details below.

 

Part Number: 1325-TFE

Product Link: HERE

 

Press Release:

Description:
Bearing & Cable Guide Kit for the Turtle Racing Pull Start V2
Kit includes 2 Replacement bearings and 1 Replacement Cable Guide for your Turtle Racing V2 Pull Start.

Part Number:
1325-TFE