Losi 5IVE-T Product Bulletin

Losi 5IVE-T Product Bulletin

Well some times it’s inevitable that a product as complicated, large an extensive as the new Losi 5IVE-T 4WD BND kit that at some point there will need to be a factory fix or replacement issue taken care of. The HPI Baja saw a fair share of parts that were either replaced by warranty or later improved in a different version. This Losi slip up appears to be a simple one, just some short screws that may need to be replaced with longer ones. See more details below.

 

News Bulletin:

It has come to our attention that a small quantity of the 5IVE-T trucks were assembled with a shorter than correct length screw to attach the front gear box/skid plate. Before operating your 5IVE-T please remove and check the two front most 6mm flathead screws from the bottom of the chassis and confirm they are ¾”/20mm long. If they are not please call Losi Service @ (909) 390-9595 Ext. 300 and you will be sent the longer screws. Under no circumstances should you operate the 5IVE-T with the shorter screws. We apologize for this error and thank you for your help correcting it.

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *